USEFUL NOKIA CODES
So guys below are the very useful codes
which you can use in you nokia mobile, check
them out.
which you can use in you nokia mobile, check
them out.
On the main screen type
*#06# for checking the IMEI (International
Mobile Equipment Identity).
*#7780# reset to factory settings.
*#67705646# This will clear the LCD display
(operator logo).
*#0000# To view software version.
*#2820# Bluetooth device address.
*#746025625# Sim clock allowed status.
Mobile Equipment Identity).
*#7780# reset to factory settings.
*#67705646# This will clear the LCD display
(operator logo).
*#0000# To view software version.
*#2820# Bluetooth device address.
*#746025625# Sim clock allowed status.
the WLAN adapter. This is available
only in the newer devices that support WLAN
#pw+1234567890+1# Shows if Sim have
restrictions.
*#92702689# – takes you to a secret menu
where you may find some of the information
below:
1. Displays Serial Number.
2. Displays the Month and Year of
Manufacture
3. Displays (if there) the date where the
phone was purchased (MMYY)
4. Displays the date of the last repair – if
found (0000)
5. Shows life timer of phone (time passes
since last start)
*#3370# – Enhanced Full Rate Codec (EFR)
activation. Increase signal strength, better
signal reception. It also help if u want to use
GPRS and the service is not responding or too
slow. Phone battery will drain faster though.
*#3370* – (EFR) deactivation. Phone will
automatically restart. Increase battery life by
30% because phone receives less signal from
network.
*#4720# – Half Rate Codec activation.
*#4720* – Half Rate Codec deactivation. The
phone will automatically restart
If you forgot wallet code for Nokia S60 phone,
use this code reset: *#7370925538#
Note, your data in the wallet will be erased.
Phone will ask you the lock code. Default lock
code is: 12345
Press *#3925538# to delete the contents and
code of wallet.
Unlock service provider: Insert Sim, turn
phone on and press vol up-arrow keys) for 3
seconds, should say pin code. Press C, then
press * message should flash, press * again
and 04*pin*pin*pin#
*#7328748263373738# resets security code.
Default security code is 12345
automatically restart. Increase battery life by
30% because phone receives less signal from
network.
*#4720# – Half Rate Codec activation.
*#4720* – Half Rate Codec deactivation. The
phone will automatically restart
If you forgot wallet code for Nokia S60 phone,
use this code reset: *#7370925538#
Note, your data in the wallet will be erased.
Phone will ask you the lock code. Default lock
code is: 12345
Press *#3925538# to delete the contents and
code of wallet.
Unlock service provider: Insert Sim, turn
phone on and press vol up-arrow keys) for 3
seconds, should say pin code. Press C, then
press * message should flash, press * again
and 04*pin*pin*pin#
*#7328748263373738# resets security code.
Default security code is 12345
*#1471# Last call (Only Vodafone)
*#21# Allows you to check the number that
“All Calls” are diverted to
*#30# Lets you see the private number
*#43# Allows you to check the “Call Waiting”
status of your phone.
*#62# Allows you to check the number that
“Divert If Unreachable (no service)” calls are
diverted to
*#67# Allows you to check the number that
“On Busy Calls” are diverted to
*#67705646# Removes operator logo on 3310
& 3330
*#21# Allows you to check the number that
“All Calls” are diverted to
*#30# Lets you see the private number
*#43# Allows you to check the “Call Waiting”
status of your phone.
*#62# Allows you to check the number that
“Divert If Unreachable (no service)” calls are
diverted to
*#67# Allows you to check the number that
“On Busy Calls” are diverted to
*#67705646# Removes operator logo on 3310
& 3330
*#73# Reset phone timers and game scores
*#746025625# Displays the SIM Clock status,
if your phone supports this power saving
feature “SIM Clock Stop Allowed”, it means
you will get the best standby time possible
*#746025625# Displays the SIM Clock status,
if your phone supports this power saving
feature “SIM Clock Stop Allowed”, it means
you will get the best standby time possible
*#7780# Restore factory settings
*#8110# Software version for the nokia 8110
*#92702689#
Displays – 1.Serial Number, 2.Date Made,
3.Purchase Date, 4.Date of last repair (0000
for no repairs), 5.Transfer User Data
12345 This is the default security code
press and hold #
Lets you switch between lines
*#8110# Software version for the nokia 8110
*#92702689#
Displays – 1.Serial Number, 2.Date Made,
3.Purchase Date, 4.Date of last repair (0000
for no repairs), 5.Transfer User Data
12345 This is the default security code
press and hold #
Lets you switch between lines
0 comments:
Post a Comment